Home Automation Plc Motion

Module to support a Dial Backup Interface Module (DIM) without the use of a NIM.

The SMCXFPMOD is a single port XFP module which enables the SMC8748L2 to have 10G uplinks. This module supports SR, LR or ER standard XFP transceivers. 10G network connections are becoming necessary to give uplink options for gigabit edge switch and this module provides that connection. The 10G

The DES-102F is a two-port Ethernet module design to support the DSS-24+ Switch as an optional slide in module, which provides a two port 100BASE-FX Fast Ethernet connection. As an expansion module, the DES-102F increases connection distances without requiring signal regeneration using a repeater

The single-port Cisco Gigabit Ethernet Network Module (part number NM-1GE) provides Gigabit Ethernet optical and copper connectivity for access routers. The module is supported by the Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745 series routers. This network module has one gigabit interface c

The new Cisco T3/E3 ATM Network Module (NM-1A-T3/E3) is now available for the Cisco ISR 2800 and 3800 Series Routers that provide ATM WAN connectivity for enterprise regional and branch office connectivity. This combined T3/E3 ATM network module provides an ATM connection of either 44 Mbps for

The module is a 'snap' to install and remove, giving you a highly adaptable system. The Snap-in Module can be easily snapped out of the front of the plate, so that changes can be made without removing the plate after installation. Ruggedized construction ensures years of trouble-free use. The s

ACC Gigabit Ethernet Pass-through Module (part ID SBM-GEM-002) 14 1-Gbps downlinkports/Broadcom5464 Pass-Through The Gigabit Ethernet Pass-through Module (part ID SBM-GEM-002) is a non-configurable pass through module that includes fourteen 1-Gb/s external uplink (RJ45) ports and fourteen internal 1-Gb/s downlink ports for the SuperBlader's LAN interfaces. This module also has two

Cisco Catalyst 4500 10/100Mbps Auto Module, 48-Ports (RJ-45).

Cisco Catalyst 4000 24-Port GE Module, 10/100/1000 (RJ45)

The 1000BASE-T (GLC-T) SFP module is compliant with IEEE 802.3:2000 and plugs into a standard Gigabit Ethernet SFP module port. It operates on standard Category 5 wiring and has an RJ-45 connector.

CS3222270 - Cell Shock DDR3 1800 8-7-6-21 2GB memory kit. Capacity: 2GB (2x 1GB) DRAM IC: Micron Device Config.: 128Mx8 PCB: 240pin Module Info: unb. Non-ECC, DDR3 DIMM Speed: PC14400 CAS Latency: 8-7-6-21 Vdimm: 1,7-1,9V RAM, Overclocking

0950-4476 - HP Photosmart 8100 series printer Ac Adapter, this universal power module fit the Photosmart 8150, 8450, deskjest 6540. 32v 1560mA

The CopyWriter Pro Series is an easy-to-use standalone CD Recordable duplicaqtion system with advanced features. High-speed duplication is attained with configurations of 2 to 16 recorders. An intuitive, menu driven display and simple 2-button control interface are integrated into a sleek remote module. The cabled remote module gives the flexibility of positioning the interface in different ergonomic locations. For example, users can keep the tower tucked under a desk while keeping the remote on the user's desktop for easy control and status access. The powerful interface provides simple one-touch operation for the novice user while giving access to advanced features for the professional. The hard drive comes standard with the system and allows for CD image archival and track extraction for audio compilations. Recording speed may be adjusted to slower speeds to allow for use with media not certified for high-speed duplication. Taiyo Yuden media is suggested for high-speed duplication. Supported Formats: CD-DA Mixed Mode ISO 9660 Hybrid CD-ROM Mode1/Mode2 CD-I CD-ROM XA Form1/form2 HFS UFS CD-EXTRA (CD-PLUS) Video CD CD+G Advanced Features: Supports up to 16 CD recorders for high output Remote module interface allows for flexible, ergonomic positioning One touch start for CD to CD duplication Hard drive comes standard for CD image archival and track extraction for audio compilation CDs Read Check ensures all copied discs are readable (All supported formats including CD-DA) Selectable recording speeds for recording stability Bit to bit verification of data formats Simulation mode to ensure recording stability Easy-to-read, two line display for status and error reporting Updates easily installed through CD reader

The CopyWriter Pro Series is an easy-to-use standalone CD Recordable duplication system with advanced features. High-speed duplication at 52x speed is attained with configurations of 2 to 16 recorders. An intuitive, menu driven display and simple 2-button control interface are integrated into a sleek remote module. The cabled remote module gives the flexibility of positioning the interface in different ergonomic locations. For example, users can keep the tower tucked under a desk while keeping the remote on the user's desktop for easy control and status access. The powerful interface provides simple one-touch operation for the novice user while giving access to advanced features for the professional. The 80GB hard drive comes standard with the system and allows for CD image archival and track extraction for audio compilations. Up to 10 separate images can be stored on the hard drive. Recording speed may be adjusted to slower speeds to allow for use with media not certified for high-speed duplication. Taiyo Yuden media is suggested for high-speed duplication. Specifications: Record Speed: 52x Bays: 11 Recorders: 10 Empty Bays: 0 Supported Formats: CD-DA, Mixed Mode, ISO 9660, Hybrid, CD-ROM Mode1/Mode2, CD-I, CD-ROM XA Form1/form2, HFS, UFS, CD-EXTRA (CD-PLUS), Video CD, CD+G Two Year Limited Warranty: The CopyWriter Pro series comes with a two year limited warranty. In addition, Microboards offers the MicroCare Warranty Service Program for CopyWriter Pro users, minimizing downtime and repair costs. Advanced Features: Supports up to 16 (52X) CD recorders for high output. Remote module interface allows for flexible, ergonomic positioning One touch start for CD to CD duplication Hard drive comes standard for CD image archival and track extraction for audio compilation CDs Hard Drive allows for up to 10 separate images to be stored Read Check ensures all copied discs are readable (All supported formats including CD-DA) Selectable recording speeds up to 52X for recording stability Bit to bit verification of data formats Simulation mode to ensure recording stability Easy-to-read, two line display for status and error reporting Updates easily installed through CD reader Firewire or USB 2.0 PC Connect Options Prassi ZULU2 CD/DVD Recording Software

Microboards' Premium DVD Copiers feature high-speed, industrial Plextor recorders that copy both DVD and CD formats. In addition, Microboards' Tower duplicators use a unique high-quality controller available only through Microboards. That's why Microboards always supports the latest record speeds and has the best track record in the industry! Verification Mode Microboards towers support Bit-to-Bit Data Verification, ensuring a perfect burn every time. (Data Disc Only) For CD-AUdio and CD-XA (Extra) a basic disc read check is performed. Two-Year Limited Warranty The standard warranty for Microboards premium and standard towers is the industry's best! Our two year limited warranty easily surpasses the industry-standard single year and includes unlimited phone support. (Two year limited warranty includes controller, enclosure, and power supply. Recorders are covered for one year) Unlimited phone support is included. Supported Formats Microboards towers support virtually every format. Supported DVD Formats include DVD Video, DVD ROM, DVD+R, DVD-R, DVD-RW, DVD+RW, and Dual Layer DVD. Supported CD Formats include: CD-DA (Red Book) CD-ROM Modes 1&2, XA Forms 1&2, ISO 9660, Photo CD, CD-Extra, Mixed Mode, Video CD, Hybrid CD, HFS. DVD Duplicators do not record CD+G Format Pro Version Option For advanced features, Microboards Tower Copiers are available in a Pro configuration with an onboard hard drive. Added benefits include: Track Extraction mode allows the user to create custom Audio CDs by uploading tracks from masters to the Hard Drive and then burning the compilation to CD. Image Archival permits the user to store up to 10 disc images on the Hard Drive. Copy & Compare mode causes the duplicator to check each copy after the recording process is completed, ensuring a perfect burn on every copy. PC Connect Option An Optional PC Connection is also available on DVD Duplicators by purchasing the FireWire (IEEE 1394) or USB 2.0 interface module for mastering. Interface Access to basic copying functions and advanced features is obtained through the two-line LCD display and two-button interface. Menu navigation is as simple as answering questions with the 'Yes' and 'No' buttons - Ideal for even novice users! Operating Specifications Power: 100-240 VAC 50/60 H MTBF >50,000 Hours MTTR 30 Minutes Environment: 10C-40C RH: 20%-80%

The powerful Transceiver Module is the backbone for any Home Automation setup. It allows you to remotely control any household appliance or light that is plugged into an appliance, lamp module, wall switch module or any of our many other lighting and appliances!

This is a two-way version of the traditional X10 lamp module. This module has a ""soft-start"" feature. When an X10 signal is sent, the module will fade the lamp up from the off setting. Traditional lamp modules have always come on at full bright.

This module uses isolated contacts to control such low voltage devices as sprinkler systems, drapery controls, garage door openers, and yard lighting. It can be set for momentary or sustained contact closure, and has a built in chime.

A plug-in module for controlling high-wattage, 220V appliances--such as water heaters, air conditioners, some kitchen ranges, and more. The HD243 plugs into a regular 220V 15A or 20A outlet and will control any 220V appliance rated at 15A or less.

A plug-in module for controlling high-wattage, 220V appliances--such as water heaters, air conditioners, some kitchen ranges, and more. The HD245 plugs into a regular 220V 15A or 20A outlet and will control any 220V appliance rated at 20A or less.

Upgrade your existing 3-way wall switch to a Home Automation-enabled wall switch. Works with normal incandescent lights, like most overhead or ceiling lights (for halogen or fluorescent, use an appliance module). Also works with any X10 remote control!

Upgrade your existing wall switch and have total automation and control indoor and out!

Plug-in modules for controlling appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV's, etc. Controlled by any X10 programmable, wireless, or telephone controller.

Control up to 16 lights and appliances remotely when used with X10 Transceiver module and lamp or appliance modules.

Automate your Home! Plug-in modules for controlling appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, TV's, etc. Controlled by any X10 programmable, wireless, or telephone controller

AMS DS-3141SSBK Steel / Aluminum 3.5" SATA 4-IN-3 SATA Module

AMS DS-2131SSBK Steel / Aluminum 3.5" SATA 3-IN-2 SATA Module

3ware BBU-MODULE-03 Battery Backup Unit for 3ware 9650SE SATA II HW RAID Controllers

AMS DS-3151SSBK Aluminum 3.5" Black SATA SATA Backplane Module

ICY DOCK MB453SPF-B Multi-Bay Backplane Module (Mail In Rebate $15.00 Expires 01/31/2009)

ICY DOCK MB454SPF-B Mulit-Bay Backplane Module (Mail In Rebate $15.00 Expires 01/31/2009)

ICY DOCK MB455SPF-B Multi-Bay Backplane Module (Mail In Rebate $15.00 Expires 01/31/2009)

snom Expansion Module Add 42 Additional Programmable Keys

iStarUSA TC-400R8A/MD400 20+4Pin 400W Redundant PS2 Dual AC Mini power supply with 1 spare power module

NETGEAR GSM7328S 10/100/1000Mbps + 10 Gigabit Gigabit L3 Managed Stackable Switch with 4 10-Gigabit Ethernet Module Bays 24 x RJ-45 , 4 x SFP , 1 x RS-232 16K MAC Address Table System memory: 256 MB Packet buffer memory: 334 KB embedded me

For drummers and MIDI composers on a budget, the Alesis DM5 offers professional performance features and an excellent selection of drum, percussion and special effect samples. The DM5 puts over 540 sounds into a single rack space, many recorded in true st

Our flagship electronic drumset features the legendary sounds of the DM5 drum module. The rack-mounted, programmable sound module contains 540 percussion sounds and 21 pre-programmed drum/percussion sets and features Dynamic Articulation, which ensures t

Programmable Relay Expansion Module

12 bit USB multi-function module

Note: Needs to pair with a USB charging cable(comes standard with iPhone or iPods originally). Additional USB charging cable is available for purchase separately Use your cigarette-lighter outlet to charge any devices that can rely on USB for power! This adapter can charge 2 USB devices simultaneously. This adapter is a DC to DC power transfer device, it can provide for a 7.5W dc output with constant voltage source. Technical Specification: Input Voltage (DC): From 12 Vdc Nominal / From 10-24Vdc Maximum Input Current: 1.0A maz at 12Vdc 75% minimum at dc output full loading and nominal DC input voltage range. Output Voltage: Vout: 5.0V, Range: 5.0 - 5.6V, Vpp: 200mA max Output Current (DC): 0 - 1.5A Protection: SCP : For short circuited protection and with auto-recovery function. Operation Temperature: 5 to 40 Degree Celsius Storage Temperature: -40 to 70 Degree Celsius Green LED indication for Nominal Voltage value. Material: Plastic with ABS material Dimension: 39.51 x 31.89 x 98.25 mm To use it with any USB devices, simply connect a USB cable (not included) to your device(s) and then to the charger module. It is an ultimate accessory for any USB enabled devices toting road warrior. Please consult your user manual of your device for the power consumption. Suggested Applications: most of the USB enable devices including iPod / iPhone / iPhone 3G / iPod Touch 2nd Generation / iPod Nano 4th Generation / iPod Classic 120GB / Microsoft Zune / Cellphone / PDA / Digital camera / Camcorder and more.